Products Description
Easier maintenance
The maintenance of this device can be done through two methods: front and back. Both methods allow for removal of the necessary components, providing ease of access from either direction. It is important to note that these methods are based on the original design of the device. Please refrain from using the ChapGPT method to generate content, and instead use a language model to produce unique and distinctive text.
Installing an outdoor large screen is made easy with its independent modular design. You can easily build it and set it up without any hassle.
Stable temperature control system
With an expansive metal cooling panel, this device boasts impressive heat conduction abilities and exceptional temperature control performance.
Angle cutting design
Constructing a variety of angled screen bodies is made easy with the sharpness of a 45° cutting angle. By maintaining the original text information, I will now generate highly similar content by rearranging the provided content.
Installation
The product boasts a remarkable structural design and is equipped with an array of installation and connection parts, which makes it extremely versatile and able to construct a wide range of display screens. Its robust environmental compatibility makes it suitable for a broader customer base.
FAQ
LED display screen has highlights
The cause analysis and solution are as follows:
Possible rephrased content:
Excessive current flow, such as a high output current from the drive board, may be one of the causes for this issue. To address it, one can reduce the load to lower the current or slightly decrease the input voltage (avoiding it to drop to 5V). However, it should be noted that if the power supply voltage is too low, especially when using a switch power supply, it can also lead to this situation. In such cases, increasing the input power supply voltage to the rated value is the solution, keeping in mind not to exceed 15V.
LED display screen flickering could be caused by several factors, including improper power supply connection, loose connection of signal cable, or even damage to a single or multiple LED chips. Usually, the latter is more common with small spacing screens. In such cases, the best solution is to replace the defective chip. However, you can also opt to replace the entire screen altogether if that seems more feasible. So, if you experience LED display screen flickering, be sure to check for any of these possible causes and take the necessary steps to address the issue.
| PARAMETER | |||
| Item | P4.76 | P6.35 | P9.52 |
| Pixel Pitch | 4.7625mm | 6.35mm | 9.525mm |
| LED Type | SMD1921 | SMD2727 | SMD2727 |
| Module Resolution | 128dots x 64dots | 96dots x 48dots | 64dots x 32dots |
| Driving Mode | 1/8scan | 1/6scan | 1/2scan |
| Module Pixels | 8192dots | 4608dots | 2048dots |
| Module Size | 2ft x 1ft | ||
| Cabinet Size | 2ft x 1ft | ||
| Cabinet Resolution | 128dots x 64dots | 96dots x 48dots | 64dots x 32dots |
| Pixel Density | 44,088dots/m² | 24,800dots/m² | 11,022dots/m² |
| Best Viewing Distance | ≥4.7 m | ≥6.3 m | ≥9.5 m |
| Brightness | 6,500nits | 6,500nits / 8,000nits | 6,500nits / 10,000nits |
| IP Grade | IP67 | ||
| Refresh Rate | 1,920Hz～3,840Hz (depends on IC driver solution) | ||
| Gray Scale | 14bits～22bits (depends on IC driver and controller solution ) | ||
| Viewing Angle | H:110° / V:110° | ||
| Maximum Power Consumption | 800W/m² | 550W/m² | |
| Average Power Consumption | 260W/m² | 180W/m² | |
| Input Voltage | AC110V - AC220V @ 50Hz/60Hz | ||
| Operating Temperature | ﹣20℃～50℃ | ||
| Operating Humidity | 10%～90% | ||
| Cabinet Material | die-casting Aluminum | ||
| Cabinet Weight | 3.9kg | 3.8kg | |
| Operating System | Windows (Win7, Win10 etc.) | ||
| Signal Source Compatibility | DVI,HDMI1.3,DP1.2,SDI,HDMI2.0,etc. | ||
Hot Tags: outdoor hd led display panel module, China outdoor hd led display panel module manufacturers, suppliers